Cannot Control Laptop Slave, Screens Not Working
Master is Windows 10
Slave is Windows 7
I first ran into a hiccup where the slave wouldn't boot the game, so I:
*Followed step by step instructions on the Isboxer site http://isboxer.com/wiki/HOWTO:Use_ISBox ... _Computers
*Disabled firewall on slave
*Enabled Private Network on slave
*Entered IP addresses for the Computers on in the Set
After this, I launched the master set 1 which also launched slave set 2 on the laptop screen. This worked and no errors were present on the console of either computer.
Now my problem is:
The screen for the laptop does not launch as a multiple swapping windowed screen even when selected in the set2 (which matches the same as set1) nor are the mouse actions from the Master repeated on the slave even when broadcast is selected.
Basically, the game boots on the slave into 2 separate screens despite a standard swapping screen enabled on both sets. I have had an additional monitor plugged into the laptop when first testing, then I unplugged this to use only the laptop screen with the same result.
Also, if I log into the two accounts from the master it logs into them from only the Master computer, which means the slave doesn't log in without direct input on the slave itself.
What am I missing here?