Wed Aug 26, 2015 6:15 am by bob
Yes, you said all that the first time.
Let me some something again. You don't have to use the default port.
If 10101 is not working, but some other port is, use the other port. I would avoid 10102 because ISBoxer uses that for the Multiple Computer Helper, which might be what it is connecting too rather than the other InnerSpace service.
As you have looked at the console, did you follow the instructions on the post I linked and after launching your character set, read the output on the Console? The output on both of the consoles for each computer, or lack of it, is an important part of the troubleshooting.
Also, can you provide more information about your setup?. i.e.
Are you using a "home router"
What firewall is being used
What Antivirus do you have
Are you connecting on the same method, i.e. both Wired/Wireless.
If you are using Wireless, can you try Wired.
Other things.
Have you rebooted your router?
If Wired have you tried other ports?
Have you tried disabling any firewalls altogether?
Do the appropriate character sets show up in the InnerSpace menu on each computer?
Does the InnerSpace console show on each computer, during an Export, that the character set does not live on this computer, when you know that particular character set should?
What Windows version are you running?